Wall Prep: Remove existing coverings and ensure the wall is dry, clean, level, and primed if needed.
Check Batch Details: Confirm all rolls share the same batch and lot numbers before opening.
Size the Surface: Apply wall size to ensure uniform adhesion if needed based on wall surface.
Paste & Soak: Coat the reverse side evenly with paste and let rest for 10 minutes.
Hang with Care: Position panels tightly edge-to-edge. Use a soft brush or squeeze to remove trapped air, keeping the front face clean of adhesive.
Wipe Clean: Gently dab away excess paste right away using a soft, damp sponge.
Check After 3 Panels: Stop and inspect your wall after hanging 3 strips. If you spot any flaws or colour mismatch, stop work and reach out to us immediately—claims cannot cover more than one roll once installed.
Customer Support: Have questions? Email our team: info@melbournewallpapers.com.au